Clinker Grinding Plant

The LM Vertical Slag Grinding Mill has its own hot-air system using kiln waste heat or a hot-air furnace to remove moisture during grinding. Feed moisture up to about 15% is quickly dried by high-temperature airflow, completing drying, grinding and class

Lime rotary kiln is compatible with pulverized coal and various gas fuels. Corresponding burner shall be selected to adjust flame profile and keep calcining‑zone temperature around 1350℃. Pulverized coal needs coal‑preparation & conveying equipment; gas fuel requires pressure‑regulating supply system. Confirm fuel calorific value and sulfur content during selection. Fuel composition influences heat consumption, product quality and downstream flue‑gas treatment solution.

Jamming comes from oversize, foreign matter or uneven feed. Stop, cut power and tag out, then clear the stuck material—never poke while running. Frequent jams need checking feed size and de-ironing, or adjusting upstream crushing and adding a grizzly f

The maximum feed size increases with model upgrade: approx. 25 mm for MB5X158, 30 mm for MB5X198, and 35 mm for MB5X238. Raw materials are recommended to be pre‑crushed to a proper size before feeding into the mill. This facilitates stable main�

The whole line adopts closed negative‑pressure circulation with pulse dust collector for fugitive dust capture. Dust leakage is low and emission meets environmental‑protection standards under normal conditions. Regular filter‑bag cleaning maintains

The MTW6X Fully Thin-Oil Lubricated Intelligent European Grinding Mill grinds natural gypsum, desulfurization gypsum and quicklime into building gypsum powder, gypsum-board raw material or lime powder. The negative-pressure closed circuit with pulse dust